Carbon Steels A515 Grade 60 is stocked by 0 North American distributors and produced by 4 large mills. Distributors will offer small quantity buys while mills will generally only sell large quantities, with delivery times anywhere from 10 to 50 weeks depending on size and form required
For mill (large volume) production click here
To view all click here
Specifications
The following specifications cover Carbon Steels A515 Grade 60
No Specifications.
Property Results
Chemistry Data : [top]
|
MSO currently has no data available for this grade.
|
|
Principal Design Features
|
|
A515 covers carbon steel plate for use in pressure vessels at ambient and higher temperature service. The alloy involved for the specification is basically similar to AISI 1330 steel.
|
|
|
Applications
|
|
Used for high strength plate that is fabricated into pressure vessels for intermediate and higher temperature service such as boilers.
|
|
|
Machinability
|
|
Machinability is good, similar to that of the plain carbon steels.
|
|
|
Forming
|
|
The alloy is readily formed by conventional methods.
|
|
|
Corrosion Resistance
|
|
This is essentially a plain carbon steel and is not corrosion resistant. It will rust unless protected.
|
|
|
Welding
|
|
This specification cover plate steel that is intended to be fabricated by welding. Thus it is readily weldable by standard methods.
|
|
|
Heat Treatment
|
|
Plate material to this specification is supplied in the "as rolled" or normalized or stress relieved condition. Further heat treatment is not covered by this specification.
|
|
|
Forging
|
|
Material is supplied as plate and not subjected to later forging.
|
|
|
Hot Working
|
|
If need be this plate material could be hot worked. Consult the alloy supplier for temperature and treatment information.
|
|
|
Cold Working
|
|
Plate material may be readily bent or cold formed as is typical of plain carbon steels.
|
|
|
Annealing
|
|
Annealing is not covered by this specification. However the steel involved can be annealed at 1600 f and slow cooled.
|
|
|
Tempering
|
|
Not applicable.
|
|
|
Hardening
|
|
This specification does not cover hardening by heat treatment and quenching, although the steel is capable of such.
|
|
|
Other Mechanical Props
|
|
PVQ
|
|
Physical Data : [top]
|
|
|
Density (lb / cu. in.)
|
0.284
|
Mechanical Data : [top]
|
MSO currently has no data available for this grade.
|
Videos :
|
MSO currently has no videos available for this grade.
|
Disclaimer
This information is provided "as is" and Metal Suppliers Online, Inc. makes no warranty of any kind with respect to the subject matter or accuracy of the information contained herein. Metal Suppliers Online, Inc. specifically disclaims all warranties, expressed, implied or otherwise, including without limitation, all warranties of merchantability and fitness for a particular purpose.
In no event shall Metal Suppliers Online, Inc. be liable for any special, incidental, indirect or consequential damages of any kind or any damages whatsoever resulting from loss of use, data, profits, whether or not advised of the possibility of damage, and on any theory of liability, arising out of or in connection with the use of the information contained herein.
This publication may include technical inaccuracies or typographical errors. Changes may be periodically made to the information herein.
