---

Carbon		0.1 max
Copper		0.1 max
Iron		0.1 max
Magnesium		0.01 - 0.1
Manganese		0.3 max
Nickel		Balance
Silicon		0.1 max
Sulphur		0.008 max
Titanium		0.005 max

Principal Design Features		A commercially pure wrought nickel alloy combining excellent corrosion resistance with high electrical and thermal conductivities.

Applications		Generally employed in temperature sensors, leadframes, transducers, transistors and a variety of electronic components.

Machinability		Behaves like the other 99% nickel content alloys. It is machinable by conventional means, but "gummy" in behavior. Rigid tooling and aggressive feed rates assist in good machining.

Forming		Conventional cold and hot forming methods may be employed with this alloy. Full annealing after work is required to reattain maximum properties.

Welding		This alloy may be welded, soldered or brazed using most conventional processes. Clean and remove all foreign objects prior to welding to assure maximum weld integrity.

Annealing		Soak at 1300-1700 F, air cool.

Hardening		This alloy does not respond to hardening by heat treatment.

Physical Data : [top]

Density (lb / cu. in.)	0.321
Specific Heat (Btu/lb/Deg F - [32-212 Deg F])	0.109
Melting Point (Deg F)	2630
Poissons Ratio	0.28
Modulus of Elasticity Tension	30

Form		Strip
Condition		Spring Temper
Temper		70
Tensile Strength		110
Yield Strength		92
Elongation		8
Form		Strip
Condition		Test Specimen Annealed
Temper		70
Tensile Strength		65
Yield Strength		23
Elongation		47